The Philip Bloom Edition VBag is a flexible bag for protection and rigging of smaller cameras like DSLRs, Canon C300, RED Epic and similarly sized cameras. When air is evacuated from the bag using the included pump, the bag hardens and keeps it's form for extended periods of time (hours or even days depending on humidity, temperature and air pressure). You can use the VBag to rig a camera in the most impossible of places; chairs, trees, cupboards, on the ground, on sticks - basically on whatever surface you need. Oh, and it's a perfect for just wrapping your camera during transport.

UL ( Ultralite ) Material

The Pro IO Top Plate was designed to be added to the top of the Pro IO Module and provide more flexible mounting arrangements. The plate has numerous 1/4-20 top and side mounting locations in addition to recently added 3/8-16 mounting holes. Additionally, there are rear mounting locations for the Rear Mounting plate (sold separately) where you can mount our APU or any other third party accessory that utilizes the four M4 mounting hole arrangement from the rear of the Epic or Scarlet cameras. 

*** CAUTION: THIS PLATE IS FOR MOUNTING ACCESSORIES TO YOUR CAMERA.  USE COMMON SENSE AND DO NOT OVERLOAD OR ATTEMPT TO MOUNT YOUR CAMERA TO ANYTHING USING THIS PRODUCT.

FEATURES:
- Solid one piece construction.
- Dozens of additional accessory mounting locations
- Rear holes for attachment of Rear Mounting Plate (optional).
- Captured stainless steel screws.

PACKAGE CONTENTS:
1  Pro IO Top Plate
2  Stainless steel captured screws

Weight: 7.6 oz. (215g)

EPIC® and SCARLET® is a registered trademark of Red.com, Inc.  View Factor is not affiliated with Red.com, Inc. 

The Small Top Plate was designed to be added to the top of the +1 Module for Epic and Scarlet cameras. The plate provides 1/4-20 top mounting locations as well as a means for attaching the Rear Mounting plate (sold separately). 

*** CAUTION: THIS PLATE IS FOR MOUNTING ACCESSORIES TO YOUR EPIC CAMERA.  USE COMMON SENSE AND DO NOT OVERLOAD OR ATTEMPT TO MOUNT YOUR CAMERA TO ANYTHING USING THIS PRODUCT.

FEATURES:
- Solid one piece construction.
- Rear holes for Rear Mounting Plate.
- Captured stainless steel screws.

PACKAGE CONTENTS:
1  Small Top Plate
2  Stainless steel captured screws

Weight: 5 oz.

EPIC® and SCARLET® is a registered trademark of Red.com, Inc.  View Factor is not affiliated with Red.com, Inc. 

The Pro IO Kit contains all the nessasary plates to use our APU or a RED backpack on your Scarlet or Epic. It was designed to be added to the top of the Pro IO Module. The kit provides numerous 1/4-20 side and rear mounting locations as well as the Rear Mounting plate.  APU mounting shoulder screws are not included, you can utilize the ones that are included with the APU.

*** CAUTION: THIS PLATE IS FOR MOUNTING ACCESSORIES TO YOUR CAMERA.  USE COMMON SENSE AND DO NOT OVERLOAD OR ATTEMPT TO MOUNT YOUR CAMERA TO ANYTHING USING THIS PRODUCT.

FEATURES:
- Solid one piece construction.
- Rear holes for Rear Mounting Plate.
- Captured stainless steel screws.

PACKAGE CONTENTS:
1  Pro IO Top Plate
1  Small Top Plate
1  Rear Plate 
6  Stainless steel captured screws

Laser Etching Templates:
Click here for REAR PLATE template

EPIC® and SCARLET® is a registered trademark of Red.com, Inc.  View Factor is not affiliated with Red.com, Inc. 

The +1 Module Kit contains all the necessary plates to use our APU or RED backpack on your Scarlet or Epic. It was designed to be added to the +1 Module. The kit provides numerous 1/4-20 side and rear mounting locations as well as the Rear Mounting plate.  APU mounting shoulder screws are not included, you can utilize the ones that are included with the APU.

*** CAUTION: THIS PLATE IS FOR MOUNTING ACCESSORIES TO YOUR CAMERA.  USE COMMON SENSE AND DO NOT OVERLOAD OR ATTEMPT TO MOUNT YOUR CAMERA TO ANYTHING USING THIS PRODUCT.

FEATURES:
- Solid one piece construction.
- Rear holes for Rear Mounting Plate.
- Captured stainless steel screws.

PACKAGE CONTENTS:

1  Small Top Plate
1  Rear Plate 
4  Stainless steel captured screws

Laser Etching Templates:
Click here for REAR PLATE template

EPIC® and SCARLET® is a registered trademark of Red.com, Inc.  View Factor is not affiliated with Red.com, Inc. 

NEW! CargoHold™ case for your Redmag™ media. Made from high impact polypropylene plastic this case will protect those valuable SSD Drives from damage between the camera and DIT station. Available in 5 colors, the Cargo Hold™ case makes SSD identification quick and easy - red for "exposed" and green for "ready to format". You decide what colors fit your workflow. Made in U.S.A. 

Contents:

-1 CargoHold™ SSD Case.

NOTE: COLOR SHADE MAY VARY SLIGHTLY.

Redmag™ is a trademark of Red.com, Inc. View Factor is not affiliated with Red.com, Inc. 

This kit includes 2 of Dionic 90 Batteries and a Twin 60W Portable Quick Charger. The DIONIC 90 can handle a 6 amp load and is the ideal battery choice when low weight and longer run-times are a priority.

Size: 2.12 x 5.25 x 3.50 in (5.38 x 13.34 x 8.89 cm)
Weight: 1.8 lbs (0.8 kg)
Integral digital features REALTIME display
Meets regulatory requirements including CE
14.4v 90 Wh (Nominal 95Wh; Typical 93Wh) Li Ion battery

The TWIN charger creates the lightest and smallest two position simultaneous charger Anton/Bauer has ever produced. Its high impact plastic enclosure will stand up to the most rugged use, making it an ideal travel charger. The TWIN features the same exclusive state-of-the-art charge termination techniques of all Anton/Bauer InterActive Chargers.

Size: 2.30 x 5.70 x 5.00 in (5.84 x 14.48 x 12.70 cm)
Weight: 1.1 lbs (0.5 kg)
2 Position Simultaneous Charging AC Input:100-240 VAC, 50/60 Hz. Wide Range Input 7 full-time operating charge terminations
Compatible with any Anton/Bauer Logic Series battery
Field upgradable firmware for future compatibility
Meets regulatory requirements including CE and FCC

The Anton Bauer Dionic 90 is a Lithium-Ion chemistry battery for professional videographers. Weighing less than 2 pounds, the battery is compatible with existing Anton Bauer Interactive2000 PowerChargers and the Titan series chargers. It will run a typical 25-watt camcorder for over 3 hours.

Real Time Display
The Dionic 90 Battery automatically detects the camera load and calculates the battery's run-time based upon existing operating conditions. When the camera is subjected to a change in power requirements, the camera's battery indicator will reflect the changed battery run time.

• Cell Chemistry
  Dionic contains an exclusive cell configuration unlike any other video battery. Instead of using cells originally designed for lighter duty applications, such as computers, this battery is constructed with specialized lithium-ion cells originally designed for high rate military applications.
• 
  Model: DIONIC 90
• Size: 2.12 x 5.25 x 3.50 in (5.38 x 13.34 x 8.89 cm)
• Weight: 1.8 lbs (0.8 kg)
• 14.4v 90 Wh (Nominal 95Wh; Typical 93Wh) Li Ion battery
• RealTime Display
• Integral digital features
• Meets regulatory requirements including CE
• MAXX 1.5 Warranty

Travel Restrictions May Apply

88Wh Li-ion V-Mount High Load Battery with PowerLink & Digi-View

IDX's exclusive PowerLink feature connects two E-HL9 batteries for a total power capacity of 176Wh. The 6-step 5 LED power status display gives an accurate reading of capacity in 20% increments plus the last 10%.. The E-HL9 supports Digi-View for reading battery levels in many of today’s camera viewfinders. Battery Management System (BMS) can be used for enhanced diagnostics and a comprehensive review of the battery’s history of use. E-HL9 Power Status is an accurate display of the E-HL9’s remaining power. Visually and instantly indentified at any time or shown in the camera viewfinder via Digi-View.

Product Data

Capacity: 88Wh(14.4V/6.15Ah)
Typical camera run-time: 3 hours approximately (@30W)
Dimensions: 3.35(W)x5.51(H)x2.28(D) inches
Weight: 1.63 lbs approx With its high capacity and high load discharge of 10.0 Amps at 120W, the E-HL9 is an all-round top performer.

Data Sheet

The IDX E-HL9 V-Mount Dual Battery with Charger and XLR Cable Kit from IDX packages two E-HL9 Lithium ion V-mount batteries, an IDX VL-2 Endura-type battery charger, and a 10' XLR cable to supply long-lasting power to compatible camcorders. The dual batteries can be docked together via their PowerLink connections to create an extended power solution for professional camcorders.

The batteries offer 88Wh / 6.15Ah of power for 14.4VDC equipment and feature advanced low-temperature discharge characteristics. The two batteries can be charged in five hours by the VL-2, a dual-bay sequential fast charger for the batteries that features a built-in 60W power supply. Also included with the kit is a 10' XLR cable that connects to the charger's 4-pin port to supply DC power to accessories.

Package Includes:
-2 x IDX E-HL9 Lithium Ion V-Mount Battery
-IDX VL-2 Battery Charger/Power Supply
-IDX CA-4XLR 4-pin XLR Male to 4-pin XLR Female Cable - 10'

The Anton Bauer PowerTap Kit is a component kit containing Male PowerTap connectors, pins and housings.

Note: Cable Sold Separately

The Anton Bauer Female PowerTap Kit includes female PowerTap components, pins and housings (cable not included). This kit allows the user to adapt any 12 VDC on camera light to be powered through a PowerTap connector

The LEVO cinema camera strap kit contains everything you need to carry your camera with ease. It's stylish, comfortable, and securely holds the heaviest of camera rigs. Easily attach and remove the strap with one hand in less than a second. The kit includes two mounting brackets with standard 1/4-20 stainless steel screws to mount to nearly any professional cinema camera. The brackets can easily mount to FMJ and Contineo cages . The strap and mounting hardware are proudly made in the U.S.A.

PACKAGE CONTENTS:
-1 Levo Cinema Camera Strap
-2 Machined Mounting Brackets

LEVO mounting brackets have standard 1/4-20 stainless steel screws to mount to nearly any professional cinema camera. The brackets can easily mount to FMJ and Contineo cages . Proudly made in the U.S.A.

PACKAGE CONTENTS:
-1 Machined Safety Brackets

The LEVO is a rugged handmade nylon camera strap that will allow you to carry even the heaviest camera with ease. It's stylish, comfortable, and securely holds to mounting brackets (sold separately) that can attach to nearly any professional cinema camera. The LEVO is proudly made in the U.S.A.

PACKAGE CONTENTS:
-1 Levo Camera Strap

The LEVO strap and FMJ-Lite kit contains everything you need to carry and attach accessories to your camera. The kit includes two mounting brackets with standard 1/4-20 stainless steel screws to mount to nearly any professional cinema camera. The brackets can easily mount to FMJ and Contineo cages . The strap, FMJ-Lite and mounting hardware are proudly made in the U.S.A.

PACKAGE CONTENTS:

-1 Levo Cinema Camera Strap Kit (1 Levo Strap plus 2 machined mounts)
-1 FMJ-Lite top plate.

The FMJ-TOP-LITE is a low cost cheese plate for Red EPIC/SCARLET cameras. The plate provides 29 stainless steel mounting points on standard 9mm Red spacing with all mounting hardware captured to prevent accidental loss. This plate is compatible with all of our existing FMJ products.  

Please note that the FMJ-TOP-LITE is not designed to be a replacement for the machined FMJ-TOP, it is a low cost and light weight alternative. It is designed to mount light accessories or for use with a top handle when used with a light camera setup.  If the intended use is to carry a fully rigged camera with loads of accessories then a better option would be the FMJ-TOP

Due to the layout of this product, custom laser etching is not available. 

PACKAGE CONTENTS:
1 FMJ-TOP Plate Lite

Some flexing or damage could occur if excessive loads are applied to the mounting hardware. Use for accessory mounting and light camera configurations only. The Epic and Scarlet cameras are susceptible to interference created by metal objects placed in close proximity to its wireless antenna. Although the design of the top plate includes an opening for the wireless antenna, some degradation of wireless performance is possible. EPIC® and SCARLET® are registered trademarks of Red.com, Inc. View Factor is not affiliated with Red.com, Inc. 

The Full Metal Jacket Kit (FMJ-KIT-4) surrounds your EPIC/SCARLET camera with a billet aluminum structure that securely holds the camera while providing numerous mounting points for accessories. The FMJ is designed to wrap around the camera body as closely as possible and provide proper spacing on the bottom of the camera for use on standard Red/ET bridge plates. The FMJ-BOTTOM includes a forward facing attachment for mounting the FMJ-15MM-LW bracket.  Attach two 15mm rods (not included) to quickly mount a follow focus and mattebox. The included FMJ-SIDEARMs allow for even more flexibility by integrating mounting holes and standard NATO rails for mounting any standard Red accessories.

Weight: 1.7lb with 4 side arms

PACKAGE CONTENTS:

1 FMJ-TOP, Top cheese plate
1 FMJ-BOTTOM, Bottom spacer plate
1 FMJ-15MM-LW, 15mm lightweight standard bracket
4 FMJ-SIDEARMs, Side mount NATO rails with mounting holes

Laser Etching Templates:
Click here for FMJ-TOP template 
Click here for FMJ-BOTTOM template

As with any wireless device, the Epic and Scarlet cameras are susceptible to interference created by metal objects placed in close proximity to its wireless antenna. Although the design of the top plate includes an opening for the wireless antenna, some degradation of wireless performance is possible.

EPIC® and SCARLET® are registered trademarks of Red.com, Inc. View Factor is not affiliated with Red.com, Inc. 

The Full Metal Jacket Kit (FMJ-KIT-2) surrounds your EPIC/SCARLET camera with a billet aluminum structure that securely holds the camera while providing numerous mounting points for accessories. The FMJ is designed to wrap around the camera body as closely as possible and provide proper spacing on the bottom of the camera for use on standard Red/ET bridge plates. The FMJ-BOTTOM includes a forward facing attachment for mounting the FMJ-15MM-LW bracket.  Attach two 15mm rods (not included) to quickly mount a follow focus and mattebox. The included FMJ-SIDEARMs allow for even more flexibility by integrating mounting holes and standard NATO rails for mounting any standard Red accessories.

Weight: 1.5lb (785g) with 2 side arms

PACKAGE CONTENTS:
1 FMJ-TOP, Top cheese plate
1 FMJ-BOTTOM, Bottom spacer plate
1 FMJ-15MM-LW, 15mm lightweight standard bracket
2 FMJ-SIDEARMs, Side mount NATO rails with mounting holes

Laser Etching Templates:
Click here for FMJ-TOP template 
Click here for FMJ-BOTTOM template

As with any wireless device, the Epic and Scarlet cameras are susceptible to interference created by metal objects placed in close proximity to its wireless antenna. Although the design of the top plate includes an opening for the wireless antenna, some degradation of wireless performance is possible.

EPIC® and SCARLET® are registered trademarks of Red.com, Inc. View Factor is not affiliated with Red.com, Inc. 

The APU-AB battery plate is a lightweight, compact, and easy to install battery mount for the Red Epic-X, Epic-M, and Scarlet-X cameras. Simply hand tighten the four provided shoulder screws onto the rear of your camera then slide on the plate and plug it in.... its that simple! 

FEATURES INCLUDE:
-Mounts via the 4 screw locations on back of camera safely securing it to the camera body.
-Easy to remove.
-Light weight at only 12oz. 
-User upgradable power cable. 

Package Contents:
1 APU-AB Battery plate with 6 in cable
4 2mm thick washers
4 4mm shoulder screws 

EPIC® and SCARLET® is a registered trademark of Red.com, Inc.  View Factor is not affiliated with Red.com, Inc.

The FMJ-15MM-LW attaches to the front of the FMJ-BOTTOM plate to provide standard 15mm light weight rod placement on the EPIC/SCARLET camera for mounting a mattebox and other accessories. The bracket attaches to the existing front mounting locations on the FMJ-BOTTOM and includes two captured 1/4-20 x 1/2 fasteners. 

Weight 5oz (141g).

EPIC® and SCARLET® are registered trademarks of Red.com, Inc.  View Factor is not affiliated with Red.com, Inc. 

*** CAUTION: THIS PLATE IS FOR MOUNTING ACCESSORIES TO YOUR EPIC CAMERA.  USE COMMON SENSE AND DO NOT OVERLOAD OR ATTEMPT TO MOUNT YOUR CAMERA TO ANYTHING USING THIS PRODUCT.

The Stealth plate has dozens of 1/4-20 and 3/8-16 mounting holes with RED spacing so that any standard RED accessory can be mounted to it. It provides a handy way to quickly attach a number of accessories to your Epic camera.  Additionally, you can stick a screw into the plate and hook your tape measure on it for a simple focus hook.  

One of the greatest things about the Stealth plate is how quickly you can remove it. When you remove the side handle from your Epic you have to screw in a blanking plate that comes with the camera body to protect the sensitive connections inside. Instead of using the blanking plate that came with the camera, you can replace it with the Stealth Plate. The mounting screw is captured too, so there's no risk of losing it.  The Stealth plate simply feels like an extension of the camera body - you'll never know it's there. 

Weight: 4.3 oz (122g).

Laser Etching Templates:
Click here for STEALTH Plate template

EPIC® and SCARLET® are registered trademarks of Red.com, Inc.  View Factor is not affiliated with Red.com, Inc. 

CONDITIONS ARE AS FOLLOWS:

1. One free FMJ-TOP-X for each FMJ-TOP-M purchased before 9/25/11. Just add this item to your cart and check out. 
2. Customer is responsible for shipping costs. 
3. Laser engraving not included.  Customer must use provided template.
4. Be careful - Your order will be cancelled or delayed if you add this item to your cart and did not previously purchase a FMJ-TOP-M. 

CLICK HERE FOR THE CUSTOM LASER ETCHING TEMPLATE

The FMJ-BOTTOM was designed to be added to the underside of a Red EPIC/SCARLET camera to allow mounting on existing hybrid and original Red One base plates. The plate has numerous 1/4-20 side mounting locations as well as front mounting locations for the FMJ-15MM-LW bracket (sold separately). Please note that the front hole pattern on the FMJ-BOTTOM plate is designed to only work with the FMJ-15MM-LW bracket in order to provide proper 15mm rod spacing. The FMJ-BOTTOM will attach to Red QR plates but the spacing will not be correct. 

FEATURES:
- Raised edge on front allows quick alignment of plate to camera and rods with lens.
- Mounting for 15MM-Lightweight Rods.
- Captured stainless steel screws.

PACKAGE CONTENTS:
1  FMJ-BOTTOM Plate
2  3/8-16 Stainless steel captured screws

Weight: 7.6 oz. (215g)

Laser Etching Templates:
Click here for FMJ-BOTTOM template 

EPIC® and SCARLET® is a registered trademark of Red.com, Inc.  View Factor is not affiliated with Red.com, Inc. 

The FMJ-SIDEARM bracket was designed to be used with the FMJ-TOP and FMJ-BOTTOM to provide mounting options for accessories on the side of the Red EPIC & SCARLET cameras. The bracket attaches to the FMJ-TOP and FMJ-BOTTOM utilizing two captured 1/4-20 x 1/2 fasteners.

The FMJ-SIDEARM has seven 1/4-20 and six 3/8-16 mounting locations on 18 mm centers along the length of the bracket. Additionally, the cross section of the bracket is a standard NATO rail so most Red accessories can be mounted directly without any fasteners by simply clamping to the bracket. 

RED EPIC® and RED SCARLET® are registered trademarks of Red.com, Inc.  View Factor is not affiliated with Red.com, Inc. 

The FMJ-TOP is cheese plate for Red EPIC/SCARLET cameras. The plate provides numerous mounting points in addition to permitting more than adequate airflow for the camera. All holes are on standard 9mm Red spacing.

FEATURES:

-Cutouts on both top and sides allowing more RF to pass between Remotes and Camera
-Captured Stainless Steel Screws
-Extra vents for hot air to escape
-Custom and Generic Laser Etching (A View Factor Exclusive)

PACKAGE CONTENTS:
1 FMJ-TOP Plate
6 Stainless Steel Captured Screws (2x 1/4-20, 4x M4x14)

Laser Etching Templates:
Click here for FMJ-TOP template 

As with any wireless device, the Epic and Scarlet cameras are susceptible to interference created by metal objects placed in close proximity to its wireless antenna. Although the design of the top plate includes an opening for the wireless antenna, some degradation of wireless performance is possible. EPIC® and SCARLET® are registered trademarks of Red.com, Inc. View Factor is not affiliated with Red.com, Inc. 

The Contineo 5D/7D Non-powered cage surrounds your HDLSR camera with a billet aluminum structure that securely holds your camera while providing numerous mounting points for accessories. The cage is designed to wrap around the camera body as closely as possible and lock into the bottom pin locations of the camera as well as the hotshoe mount on top.  This double point clamping essentially makes the cage one with the camera and provides rigidity that will provide easy mounting and focus pulling without the flex that accompanies traditional mounting methods.

Features:

• Easily assembled with marked parts and included fasteners.
• Unobstructed access to battery and CF card openings for quick change outs.
• 15mm lightweight wide bracket (sold separately) can be mounted to position mattebox
  rails at industry standard distance from lens center.
• Multiple 1/4-20 & 3/8-16  threaded mounting locations on sides,  top, and bottom.
• Accessory mounting locations for top/side handles, battery plate, and focus hooks.
• Moveable screw pins for use with 5D MKII or 7D.

Included Items:

• 1 Non-powered base plate for 5D MKII and 7D
• 1 Top plate
• 2 Side plates
• 8 10-32 Screws for cage assembly
• 1 1/4-20 x 3/4 camera mount screw
• 1 Hotshoe clamp plate
• 1 Hotshoe spacer for 7D
• 1 1/4-20 x 1/4" Hotshoe screw for 5D MKII
• 1 1/4-20 x 3/8" Hotshoe screw for 7D
• 1/8" and 3/32" allen wrenches for assembly

NOTE: 15mm bracket is not included.

Assembly Diagram:    CLICK HERE
Configuration Sheet:  CLICK HERE